Online sale is conceived to supply samples and spare parts in areas not covered by our distribution network.
Available quantities are limited to max 10 units for each ordering code.
|Box||46,1 x 63 x 26,4 mm (terminal block excluded)|
|Power supply||Loop-powered (2 wires) operating range 11-30 Vdc 12...35Vdc on version with RS485|
|Connection||screw terminal 5,08mm|
|Operating conditions||Temperature -40+85 °C, humidity 10..90 uR% (non condensing)|
|Material||Gray PBT, epoxy resin filling|
|Weight||Approx. 72 g|
|According to||CE, EN 61000-6-4, EN 61000-6-2, EN 61010-1|
|Dip-switch||2 / 8 poles|
The 2000.35.013 is a direct and alternating current transformer, galvanically isolated from the measuring circuit. The device is functionally and aesthetically similar to a standard active TA, but is able to measure the TRMS direct and alternating component.
The transformer is powered in loop with current 4-20mA and thus does not require a direct power supply. It is the first Hall loop-powered transformer with a precision of 0.5% on the market.
On the version with serial output RS485 Modbus (2000.35.014) and analogue output 0-10V, the span and zero can be freely configured and a Modbus address assigned; it is easy to configure using the library in the development tools of Pixsys HMIs.